Tree Stands Pro
Write a Review
CALL TO ORDER
Available
Description
Pro Tree Stands are designed to make displaying and straightening fresh-cut Christmas trees faster and easier. Built for Christmas tree lots, growers, garden centers, seasonal retailers, commercial displays, and customers who want a durable tree stand, the Pro system combines all-steel construction with a simple mechanical design for securing and positioning the tree.
Each stand is manufactured from forest-green powder-coated steel and uses a circular base to provide equal 360° weight distribution for maximum stability. The base is designed without sharp edges that could gouge floors or snag carpeting. Pro Tree Stands are Made in the USA.
One of the primary advantages of the Pro Tree Stand is its tree-straightening system. The stand uses a small vertical wedge and side screw with hand crank to secure the trunk. Once installed, the tree can be straightened by stepping on the low side of the base ring and pushing the tree in the opposite direction. This allows operators to make positioning adjustments without repeatedly removing and resetting the tree.
For retail Christmas tree lots, this straightforward system can save time when setting up display trees or installing stands for customers. The same design also makes Pro Tree Stands practical for commercial installations where multiple trees must be positioned efficiently.
Five models accommodate a broad range of Christmas tree heights. Pro 6 handles trees from 3'–6', Pro 8 from 5'–8', Pro 10 from 7'–10', Pro 12 from 8'–12', and Pro 15 from 12'–18'.
Compatible water bowls are available for each model. Adding the appropriate bowl provides water capacity for fresh-cut trees, helping operators and customers maintain access to water throughout the display period.
Key Benefits
- Fast tree setup: Designed to secure and position fresh-cut Christmas trees without a complicated installation process.
- Easy tree straightening: The circular base allows the tree to be adjusted after installation by stepping on the low side and pushing the tree into position.
- 360° weight distribution: The circular design distributes weight evenly around the stand for stability.
- All-steel construction: Built from steel for commercial and seasonal Christmas tree applications.
- Forest-green powder-coated finish: Provides a finished appearance appropriate for Christmas tree displays.
- Floor-friendly base: No sharp base edges that could gouge floors or snag carpeting.
- Wide tree-size range: Five models accommodate trees from 3' through 18' tall.
- Compatible water bowls: Different stand sizes pair with specific water bowls for fresh-cut tree hydration.
- Commercial case quantities: Multiple models are packaged for tree lots and other higher-volume seasonal operations.
- Made in the USA: Pro Tree Stands are manufactured domestically.
Applications & Use Cases
Christmas Tree Lots: Install stands on customer trees or use Pro Stands for upright tree displays throughout the retail lot.
Christmas Tree Farms: Choose-and-cut farms can offer stand installation as part of the customer's tree preparation and loading process.
Garden Centers & Nurseries: Stock multiple Pro Stand sizes alongside fresh-cut Christmas trees, tree-care products, and other seasonal supplies.
Commercial Displays: The range extends through trees up to 18', providing options for larger Christmas tree installations when the applicable stand is correctly matched to the tree.
Seasonal Retailers: Offer durable, reusable tree stands as an add-on product with fresh-cut Christmas tree purchases.
Indoor Christmas Tree Displays: The smooth circular base avoids sharp edges that could gouge floors or catch carpeting, making the stands practical for indoor installation.
Expanded Specifications
|
Model |
Recommended Tree Height |
Case Qty. |
Water Bowl Item # |
|
Pro Tree Stand 6 |
3'–6' |
10/case |
30001 |
|
Pro Tree Stand 8 |
5'–8' |
10/case |
30001 |
|
Pro Tree Stand 10 |
7'–10' |
5/case |
14573 |
|
Pro Tree Stand 12 |
8'–12' |
5/case |
14573 |
|
Pro Tree Stand 15 |
12'–18' |
1/case |
30035 |
Construction: All steel
Finish: Forest-green powder coating
Base Design: Circular base ring
Weight Distribution: Equal 360° distribution
Country of Manufacture: USA
Tree-Securing System: Vertical wedge, side screw, and hand crank
Water Bowls: Sold separately/paired according to stand size
Replacement cranks are also available. RPL-810 fits the Pro 8 and Pro 10, while RPL-1215 is listed for the Pro 12 and Pro 15.
Exact trunk-diameter limits, stand dimensions, water capacities, and total assembled weights should be confirmed for each model before adding those specifications to the individual product listings.
How It Works
- Select the Pro Tree Stand that corresponds to the Christmas tree's height.
- Place the stand on the tree with the small vertical wedge positioned near the center of the tree trunk.
- Hammer the wedge into the trunk to secure the stand.
- Start the side screw by tapping or hammering it into the trunk.
- Turn the hand crank until the screw is flush and the tree is securely held.
- Stand the tree upright and check its alignment.
- To straighten the tree, identify the low side, step on that side of the circular base ring, and push the tree away from you until it reaches the desired position.
- Install the compatible water bowl when water capacity is required for a fresh-cut tree.
FAQ’s
What is a Pro Tree Stand?
A Pro Tree Stand is an all-steel Christmas tree stand designed to quickly secure, display, and straighten fresh-cut trees. Its circular base provides equal 360° weight distribution for stability.
What size Christmas trees will Pro Tree Stands hold?
The complete range accommodates trees from 3' to 18', depending on the model. Pro 6, 8, 10, 12, and 15 models are available for progressively larger trees.
Which Pro Tree Stand should I use for an 8-foot tree?
Both the Pro 8 and Pro 10 published height ranges include an 8' tree. The Pro 8 is rated for 5'–8' trees, while the Pro 10 covers 7'–10' trees; additional tree and trunk requirements should be considered when selecting between overlapping sizes.
How do you straighten a Christmas tree in a Pro Stand?
After securing the tree, stand on the low side of the circular base ring and push the tree away from you until it reaches the desired upright position.
Do Pro Tree Stands hold water?
Compatible water bowls are available for the Pro Stand system. The Pro 6 and 8 use bowl 30001, Pro 10 and 12 use bowl 14573, and Pro 15 uses bowl 30035.
Are Pro Tree Stands made of steel?
Yes. Kirk specifies all-steel construction with a forest-green powder-coated finish.
Are Pro Tree Stands made in the USA?
Yes. Pro Tree Stands are Made in the USA.
Who are Pro Tree Stands designed for?
They are particularly useful for Christmas tree growers, choose-and-cut farms, retail tree lots, garden centers, seasonal retailers, and commercial operations that need an efficient way to display and straighten fresh-cut Christmas trees.
Return Policy
We care about your satisfaction and want you to be completely happy with your purchase. Every product is carefully inspected before shipment to ensure quality and accuracy. All returns require prior authorization. Unauthorized returns will be refused, and no credit will be issued for merchandise returned without prior approval. To request a return authorization, please call 800-426-8482 within 5 days of receipt of your order.
Unused, non-defective merchandise may be considered for return if it is:
- Returned in its original packaging
- Accompanied by a copy of the invoice
- Approved in advance by our customer service team
- Unless a product is determined to be defective due to manufacturer's defect or our error, all return shipping costs are the responsibility of the customer. A 20% restocking fee will apply to all approved non-defective returns.
